-40%

Umarex STEEL FORCE valve seals 10 pcs + gasket seals; solves MAGAZINE CO2 leak

$ 10.5

Availability: 26 in stock
  • Brand: Unbranded
  • Condition: New

    Description

    O RINGS PACKAGE & TOOLS FOR UMAREX STEEL FORCE VALVE ASSEMBLY WITH GASKET SEALS
    You're buying quality replacement O rings for your Umarex STEEL FORCE BB CO2 repeater + tools for easier disassembly of the valve. These O rings are direct after market replacement for O rings that are in magazine CO2 release valve assembly. These O rings will solve the issue of leaking CO2 when you insert your magazine in the Steel FORCE magazine slot if the leak is O ring failure related. Tools included with this seals were developed especially for Steel FORCE valve and will make change of seals an easy job. We now also include with this seal kit
    gasket seals for CO2 bulbs
    (2 pcs), which solve CO2 leak when gasket seals are worn out, which is not so rare as valve seals failure.
    Changing seals in the valve solves leak in about 99 % cases unless there is a problem with the valve. If there's valve malfunction or valve is worn out, seals most likely will not fix the leak.
    If there is a problem with the valve itself, leak happens directly after mag is inserted in the Steel Force which is the same symptom as would be if O ring is torn. To try solving the valve leak, we recommend to completely take apart the valve itself and lubricate it with oil, and put back together. There may be some part stuck or not seated properly. Be careful here, as there are few small parts in there (tiny spring, plastic seal disc and CO2 release pin), that can get lost super fast. Cause of the valve leak can also be if small white plastic washer is worn out (visible on top of the valve). If plastic disc is scratched or maybe dented even it would cause leak. To try to fix this, we recommend to turn this disc around and reinstall, this may fix leak.
    99 % CHANCE
    STEEL FORCE LEAKS CO2 AFTER MAGAZINE IS INSERTED
    In 99 % cases reason for this leak is torn/over-used smaller O ring which is abused each time magazine is inserted (you get 3pcs of these in package). Second reason is that at factory they usually use low grade O rings. These are quality replacements that will solve the issue 100%. Such O rings  as far I know are not available at Steel FORCE retailers, as they don't stock any replacement parts for any warranty claims. By getting these O ring save pack, you can be all good and prepared for the time when this issue happens. Be ready, so this will not ruin your shooting day.
    1% CHANCE WHY FORCE LEAKS CO2 AFTER MAGAZINE IS INSERTED
    Changing seals in the valve solves leak in about 99 % cases unless there is a problem with the valve. If there's valve malfunction or valve is worn out (disc seal), changing O ring seals most likely will not fix the leak.
    If there is a problem with the valve itself, leak happens directly after mag is inserted in the Steel Force which is the same symptom as would be if O ring is torn. To try solving the valve leak, we recommend to completely take apart the valve itself and lubricate it with oil, and put back together. There may be some part stuck or not seated properly. Be careful here, as there are few small parts in there (tiny spring, plastic seal disc and CO2 release pin), that can get lost super fast. Second cause of the valve leak can also be if small white plastic washer is worn out (visible on top of the valve). If plastic disc is scratched or maybe dented it would cause leak. To try to fix this, we recommend to turn this disc around and reinstall, this may fix leak.
    *With your purchase you will also receive guide in PDF file with pictures how to easily replace these O rings and put everything back together with no worries.
    Your Umarex STEEL FORCE BB CO2 repeater has two O rings in CO2 release valve assembly:
    1 X small O ring (reason for CO2 leak); which suffers the most as it is pierced with CO2 release pin tube each time magazine is inserted
    1 X larger which is under small O ring; this one does not take much damage, but is still included in package.
    *PLEASE NOTE, that these O rings will solve leaking CO2 you experience when you insert the magazine inside of your Steel Force, which is common issue with worn out valve seals
    GASKET SEALS FAILURE AND CO2 LEAK
    If you experience CO2
    leaking immediately after you insert fresh CO2 cartridges in the magazine (magazine is not inserted), then the problem is most likely with CO2 gasket seal failure. In this case we recommend changing these seals with seals we now provide with this kit.
    With your purchase you get:
    5 pcs of smaller O rings which is most abused and you'd need this one for proper operating (when damaged, this O ring is cause of leak)
    5 pcs of of larger O rings which is under small O ring, these don't get used up soon, but does not hurt to have some extras
    1x punching pin easy removal of safety pins to disassemble magazine
    1 x extracting tool to disassemble internal parts of the valve and remove old seals
    2 pcs of CO2 bulbs gasket seals (replace only when CO2 leak occurs immediately after cartridges are inserted)
    1x tool for removing screws retaining gasket seals
    1x DETAILED GUIDE WITH PICTURES&HINTS HOW TO REPLACE THESE MAGAZINE O RINGS (PDF file will be sent to your e-mail after payment is received)
    NEED SEALS FOR STEEL STORM? WE HAVE THEM IN STOCK.
    *IT IS HIGHLY RECOMMENDED TO HAVE YOUR MAGAZINE STORED OUTSIDE OF YOUR STEEL FORCE WHEN NOT USING IT. HAVING IT INSERTED IN MAGAZINE SLOT REDUCES SMALL O RING'S LIFE SPAN DRASTICALLY.
    SHIPPING&HANDLING INFO
    SHIPPING COST TO ALL LOCATIONS AT FLAT RATE:
    12.50 USD
    (air mail with tracking number)
    COMBINED SHIPPING
    +0.50 USD
    for each next part added to the parcel. With multiple buy you save greatly on postage cost. Combined shipping is also available for purchase of more different parts at once which will all be shipped in one package. Contact us if you plan to make such purchase to get a postage quotation for your order.
    ESTIMATED SHIPPING TIMES
    UK: 5-10 days
    OTHER EUROPE COUNTRIES:
    5-12 DAYS
    USA & OTHER NON EU COUNTRIES:
    12-35
    DAYS
    PAYMENT
    Pay pal and major credit cards.
    OTHER POPULAR SEARCH NAMES FOR THIS ITEM: umarex steel FORCE co2, umarex steel FORCE seal replacement, umarex steel FORCE service, umarex steel FORCE seal, umarex steel FORCE o rings seals, umarex steel FORCE co2 leak, umarex steel FORCE magazine leak problem, umarex steel FORCE seals, umarex steel FORCE full auto, umarex steel FORCE leak problems, umarex steel FORCE issues, ASIN: B0033K5U36, umarex steel FORCE replacement parts, Item model number: 2252155, need spare parts for a Steel FORCE, Umarex Steel FORCE Submachine, umarex steel FORCE stock, umarex steel FORCE modifications, umarex steel FORCE mods, umarex steel FORCE extension, umarex steel FORCE accessories, umarex steel FORCE air, UX-2252155 [PY-2043-4158], umarex steel FORCE adapter, umarex steel FORCE problems, umarex steel FORCE jamm, umarex steel FORCE attachments